Pages

Showing posts with label Kaiser. Show all posts
Showing posts with label Kaiser. Show all posts

Tuesday, 5 February 2013

How I made my Texture Paste Layout


For the month of February we have been playing with Texture Paste!
Here is a reminder that we are scraplifting this beautiful layout by Heather Jacob

this is our sketch 

I used Kaiser Craft papers from the Periwinkle collection.
Ash Bazzill and some clear crystal gems.

Here is a brief description of what I did:

I kept the Ash Bazzill whole to make a firm base for the whole layout.
With 'Dawn' paper I punched down the right side with a border punch, then tore the other three sides so the finished piece was about 10" x 11".   I took the left over strip, turned it over, trimmed the ends so it was a little shorter than the first piece and place to left tucking it under the larger piece slightly.

Next I took the 'Whisper' paper and tore two strips approx. 3/4" x 10". This was placed horizontally across the layout under the photo.

With 'Hint' paper I trimmed one side with a deep edge border punch to create a lacy pattern. Then I cut a piece about 9 1/2" and added it just above the two horizontal strips of floral paper, setting the remainder aside for later.  I tore a piece - bird side up - about 1 1/2" x 9" which was tucked in vertically over the left side piece of black patterned paper and slightly under the main peach piece.

Next I made a tear up from the bottom on the right side and folded it back. Then I tore a scrap from the blue dot side of the 'Whisper' paper and tucked this under gap. I added a short piece of the left over lacy border punched earlier. I repeated this with a smaller tear low down on the left side and tucked under a torn piece of floral side of 'Whisper'. I tucked in a punched leaf frond using the black side of 'Hint' paper into the gap.

After inking all the torn edges I lightly stuck them in place. I decorated them with the sewing machine and some cream and black threads.  I further distressed the edges up to the stitching.

Using texture paste and mask I added some harlequin shapes to the top left area of the layout.  After allowing this to dry I inked it slightly to highlight the shapes, and texture.

I cut my photo mount from a plain peach area of 'Breath' paper.  I made a selection of label shapes in different papers and sizes cut using the Cricut and punches - these were cut up as only small amounts of each was needed to peek out from under the photo. I inked the edges and drew round the shapes with a pen.  After building up the arrangement I stuck everything in place.

I used Sizzlets Tattered Flower Garland decorative strip die, and cut leaves and flowers using 'Breath' paper. I used leaves from the aqua side and the flowers from the peach side.  I inked the edges of all these shapes, scrunched them up and stuck them in place. I added a gem to the centre of each flower.

I cut my letters for title with Sizzlets Typeset decorative strip die and stick this to the bottom left of page.

From the manufacture's strips at the bottom of each paper I cut three flags about 2" long. These were added to the right of the photo. about 1/2" apart. Three x 1/2" punched circles from some peach paper were inked and added to left of each flag with a 3D pad. A gem was added to each circle and coloured with sky blue Promarker. Then I added three more circles and gems to the top of two horizontal strips of paper. These were coloured with a spice Promarker. 

Finally I added a gem to each tear.

Thanks for looking.
Please pop over to A Moment In Time to find out more about my layout and other projects.


Sunday, 5 August 2012

How I made my August Layout - Netting I


One of my Design Team layouts for the August Challenge.
This is my daughter Catherine dressed as a teacher for Victorian Day at school in 1999.
Please see my blog for more details.

Here is a reminder of the original layout was created by 2 Dogs, chosen by the DT for this month's challenge.

This is our sketch

I used Kaiser Craft papers from Charlotte's Dream Collection - Vision and Die Cut.


I also used some die cuts from the Charlotte's Dream Collectables.


The Die cut sheet was distressed and inked before being stuck down to a piece for Fuzzy Peach Kaiser Craft cardstock.

A 5" circle cut from Vision was distressed, inked and edged with lace. I stuck this to the right of the layout and mounted my photo onto it.

I cut a 4" circle from cardstock and mounted it onto a small doily, both were inked.
This was then trimmed with a strip of pleated gold netting, and attached to the left of the bigger circle.

I decorated with paper flowers from Kaiser Craft and Wild Orchid Crafts.




The date and 'Catherine' were spelt out with Kaiser Craft Charlotte's Dream Stickers.

I cut the sign from scraps of Bazzil and using a Sizzix die. These were heavily inked and I added eyelets to the holes. I hung the sign from the hanger with some cord then stuck to the layout with 3D foam pads. The word 'Teacher' is made with Thickers letter stickers from American Crafts.

I added some gem swirls and some decorative brads.

Thanks for looking and please check out the challenge post 'N is for Netting' for more details of the challenge which runs until 5th September.

Sunday, 27 May 2012

How I Made My May Layout III


My children dressed for Victorian Day at Primary School back in 1999

This is my second page for the Scrapology May 'C is for Charms' challenge.

This is the pretty layout we are scraplifting by Karola Witczak


 Here is our sketch 

I used papers from Kaiser Craft's Sweet Nothings collection.
The stripe paper is called 'All Yours', and the beige patterned paper is called 'Devoted'
The music print is called 'Sincerely'
Green print is 'Love Letters'.

Use a sheet of cardstock as a base, this will be completely covered, so don't worry about the colour.

Cut 2 strips 12" x 2.5" from the striped paper, ink the edges and stick to top and bottom of base card.

I cut the Devoted paper to 9.5" x 12" and trimmed the 12" sides with a Martha Stewart border punch. Ink the edges and stick centrally to base.

Cut the photo mat from music paper the same size as photo. Distress both photo and mat, ink the edges and mount off set onto layout, don't stick right down as other bits need to be tucked underneath later.

Use the Big Shot and cut the clock face from cinnamon Bazzill cardstock and add to page.

Cut title from pink side of 'Love Letters' paper and shadow from Suguaro cardstock - I used the Plantin Schoolbook Cartridge.

Cut leaves from Storybook Cartridge and green side of 'Love Letters' paper and add to layout with some pre-made roses. The butterflies were cut from the 'Love Letters' paper and glittered with Stickles. I added metal photo corners, and some charms.

I added a buckle charm to a length of brown gross grain ribbon and attached over the bottom of the photo.

The book plate was made using the Fabulous Find cartridge and I added some flat backed pearls.

Thanks for looking, and please take a look on the 'C is for Charms' post of 1st May see what the rest of the DT came up with and the details of the challenge and prize.

Friday, 10 February 2012

How I made my February Page

Here is how I made my 'Christening Gown' layout for the February Challenge.


The challenge was to create a layout inspired by SJ's original and following our sketch.




I used:
1 Sheet plain Bazzill paper
Bazzill Cardstock in Tickled Pink, Sprout and Powder Blue
6 ½” x 6 ½” Paper Pad, Kaiser Craft Bonjour (24 sheets – 10 specialty Papers including 2 foil, 4 spot varnish and 4 die cuts).
DMC thread and needle
Cricut with Storybook and Mother’s Day Bouquet Cartridges
Perfect Pearls
4” x 6” photo



I selected the patterned papers I wanted to use for the background of the layout and cut 16 pieces 3” x 3”, inked the edges and stuck down to cover the plain 12” x 12” base paper.
Then I mounted the photo onto pink cardstock to make a mat and stuck this to the layout.

I decorated some of the squares with die cut shapes from the ‘Bonjour’ patterned paper book and some I cut myself using the Cricut and the Mother's Day Boutique Cartridge.

The flower was build from many layers of die cut flowers and leaves using the Mother’s Day Bouquet, the Cricut, and some 3 D foam pads. I inked the edges of each petal and shaped them with scissors and an embossing tool.

The lettering for title was cut from patterned papers - and a shadow from cardstock. (I used two sizes 1” and 1 ½” and the Storybook Cartridge).

I highlighted the letters with Glossy Accents, and decorated the flowers and other shapes with Perfect Pearls and Stickles.

 I added some random cross stitches to link the squares here and there. To do this I made a few holes with a paper piercing tool and added stitches with a needle and DMC embroidery tread.

The journaling was added to a selection of journaling blocks from the ‘Bonjour’ patterned paper book.

Thanks for looking, please see the original post 'P is for Patchwork', posted on 1st February for more details of the challenge.